Home >> THERMO STC-CAP
Product name: THERMO STC-CAP
Decription: ‘THERMO SENSOR-CAP’S *TERMINAL LUG TYPE (STC) : 1.5 | 2.5 | 4 | 6 | 10 | 16 | 25 | 35 | 50 | 70 | 95 | 120 | 150 | 185 | 240 | 300 | 400 *2H COMPTESSION TERMINALS (STC 2H) : 25 | 35 | 50 | 70 | 95 | 120 | 150 | 185 | 240 | 300 | 400 •COLOR : RED | BLUE | YELLOW RED | GREEN | BLACK •TEMPERATURE RANGE : 55℃, 75℃
Maker: SEUNG JEON
Warranty 12 months
Inventory status: Contact
Pleased to introduce Sensor cap and appreciate your interest to us.
We have adjusted to use tapping finish on link of wire & terminal so far. And it was replaced with cap, this cap work was popular because it’s convenient, prompt work and low cost. This cap was developed to Thermo cap later, the performance of thermo cap is indicator which show changed color on accident occurred place. This function made end users to repair accident place with reasons of sudden high voltage(current) and wrong connection. Especially cabinet which was concentrated with many wires & terminals required much demands of thermo cap. Local suppliers including us have supplied thermo cap to local market and overseas(Korean companies’ established on out of Korea) so far
2. Development of Sensor cap
The difference in Sensor cap and thermo cap is single indicator performance(thermo cap) and double indicators(sensor cap). Thermo cap indicate accident by color change arranged specified temperature. End users can do work of repairing or replace wrong parts when he found changed color on accident points. But, thermo cap inform as single indicator only, it means thermo cap can not provide end users enough time for solving matters(repairing or replacement) because already accident was happened. With long production experience & collected information from end users along with SeungJeon’s capacity & ability made us to develop new cap-Sensor cap. We have the patent about sensor cap and UL & CE for quality control.
3. Performance of Sensor cap
The sensor cap provide end users enough time for repairing & replacement of parts on accident place through double indicator function. Installation is same as thermo cap. Sensor cap color is to be changed according arranged temperature- 1st warning (semitransparent status), 2nd danger(transparent status) when terminal is heated by uncertain reasons. Furthermore a portion of sensor cap can be made with translucent status, so end user can check pressing point by eyesight easily. Original color is to be changed into transparent when heat is occurred. And return to original color after solving heating matter. Sensor cap’ color change is being done step by step according to heat increase, we call it as
“Foresight capacity” – 1st indicator(warning) at 55 centigrade- no colr change status and 2nd indicator(danger) at 75 entigrade(transparent status). When end user found 1st indicator, he can arrange solution not to make situation worse in advance until 2nd indicator show
emergency. This unique function protect factory facility and laboratory’s sensitive equipment with convenience, easy indicator and low cost.
※ ‘THERMO SENSOR-CAP’ Usage Precautions
1. USE ON PLACE WHERE NO ULTRAVIOLET, DIRECT SUN LIGHT AND KEEP WITH
2. CHECK WITH HEAT GUN OCCASIONALLY AFER INSTALLATION.
3. REPLACE WITH NEW ALL WHERE ARC IS OCCURRED PLACE OR CHECK WITH
4. THE 1ST INDICATOR(WARNING) : NO TRANSPARENT CAP AT 55℃.
THE 2ND INDICATOR(DANGER) : TRANSPARENT CAP AT 75℃.
5. APPROPRIATE USAGE TEMPERATURE RANGE : -5℃ ~ 90℃.
※ ‘THERMO SENSOR-CAP’S STANDARD
•DIMENSION ( SURFACE AREA mm²)
*TERMINAL LUG TYPE (STC) : 1.5 | 2.5 | 4 | 6 | 10 | 16 | 25 | 35 | 50 | 70 | 95 | 120 | 150 | 185 | 240 | 300 | 400
*2H COMPTESSION TERMINALS (STC 2H) : 25 | 35 | 50 | 70 | 95 | 120 | 150 | 185 | 240 | 300 | 400
•COLOR : RED | BLUE | YELLOW RED | GREEN | BLACK
•TEMPERATURE RANGE : 55℃, 75℃
* DRAWING REFERENCE *
STC FOR TERMINAL LUG TYPE
STC 2H for 2H COMPTESSION TERMINALS
CERTIFICATE: UL, CE, KOREA TESTING & RESEARCH INSTITUTE, PATENT
※ PHOTOS OF SENSOR CAP COLOR CHANGE ACCORDING TO TEMPERATURE
Any further for supporting, pls don’t hesitate to contact ATEn: From Monday to Friday, from 8:00 am to 5:00 pm – Hotline: 0974 876 389 – Email: firstname.lastname@example.org